get it?
I removed the whole exhaust system (or, at least, what was left of it), and decided to make sure it was really fixed. The front section was a little misshapen from dragging along the ground, so I hammered it out and then, using a block of wood, hammered it into the rear section. Once it was pretty firmly seated, I took a u-bolt clamp and torqued it down until I thought something was about to shear. That seemed to do the trick. I threaded that back through and connected the flex pipe in the front to the manifold, again with the torque. Should be good now! (famous last words).
Posted by Bill at 22:08 2010-06-14 | Trackbacks (0) | Comments (0)
